The manual panel is a function template used to check the appearance or structure rationality according to one or more product appearance drawings or structure drawings without opening the mold At present, handboards are called the first board in different places.
通常，刚开发或设计的产品需要手工制作。 手动板是验证产品可行性的步。 找出设计产品的缺陷，不足和缺点，以改善缺陷是更直接，更有效的方法。 直到您无法从各个手样本中找到缺陷为止。 在这一点上，通常有必要进行小批量的试生产，以找出需要改进的批量不足之处。 成品不能完美甚至无法使用。 有缺陷的直接生产将被报废，这将浪费人力，物力和时间。 手通常是少量样品，生产周期短，人力和物力低。 快速找出产品设计的不足之处并加以改进，为产品定型和批量生产提供充分的依据。
Usually, newly developed or designed products need to be handmade The manual panel is the first step to verify the feasibility of the product It is the most direct and effective way to find out the defects, deficiencies and shortcomings of design products and improve them Until you can't find the defect in each hand sample At this point, it is usually necessary to carry out small batch trial production to find out the deficiencies of the batch that need to be improved The finished product can't be perfect or even used Defective direct production will be scrapped, which will waste manpower, material resources and time Hand is usually a small number of samples, short production cycle, low manpower and material resources Quickly find out the defects of product design and improve them, so as to provide sufficient basis for product finalization and mass production.
Like, please pay attention to our website of Shandong rapid prototyping. The text comes from: http://www.jrjmockup.com