公司新闻
推荐产品
联系嘉瑞杰
山东嘉瑞杰机械科技有限公司
联系人：王经理
电话：0531-88670722
手机 : 15866677695
地址：济南市天桥区梓东大道鑫茂科技城143号楼102室
手板制作一般情况是少数的样品
来源：http://www.jrjmockup.com作者：山东嘉瑞杰机械科技有限公司发布时间：2019-07-25
通常还需要进行小量的试产进而找出批量里的不足加以改善。设计完成产品一般不能做到很*，通常有缺陷，有的甚*无法使用，直接生产一旦有重点缺陷将全部报废，大大浪费人力和物力和时间
A small amount of trial production is usually needed to find out the shortcomings in the batch to improve. The finished product is generally not perfect, usually defective, and some even can not be used. Once the key production is directly disabled, it will be totally wasted, which will be a great waste of manpower and material resources and time.
而手板制作一般情况是少数的样品，制作周期短，损耗人力物力少，很快地找出产品设计的不足进而改善，为产品大规模生产提供充足的依据。减少产品次品及报废率。
The general situation of hand making is a few samples, with short production cycle, less manpower and material resources, and quickly finding out the shortcomings of product design, so as to provide sufficient basis for mass production of products. Reduce product subproduct and scrap rate.
*步：编程：编程人员分析3D数据，编写控制数控加工中心的程式语言;
青岛手板
The first step: Programming: the programmer analyses the 3D data and writes the programming language to control the NC machining center.
第二步：CNC加工：把整理好的程式语言输入计算机控制加工中心，执行程式命令;
The second step: CNC processing: input the compiled programming language into the computer control processing center and execute the program command.
第三步：手工处理：整理出加工之后的产品。主要完成的内容包括：校对数据、清除毛边、粘接、打磨抛光等;
The third step: manual processing: finishing the processed products. The main contents include: proofreading data, cleaning edge, bonding, polishing and polishing, etc.
第四步：表面处理：完成效果图中的各种表面效果，常用的为喷漆、丝印、电镀、特殊的有镭雕、阳极氧化、拉丝等;
The fourth step: surface treatment: finish the various surface effects in the effect diagram, commonly used for spray painting, screen printing, electroplating, special radium carving, anodizing, drawing and so on.
第五步：组装：处理后就是对装配问题进行数据检测，需要在表面处理之前进行试组装;
The fifth step: assembly: after processing, data detection is done to the assembly problem, and it needs to be assembled before the surface treatment.
第六步：包装：*后产品通过QC部门检测合格之后就入库!*此，手板模型制作基本完成了。
The sixth step: packing: the final product is qualified after the QC department is tested. At this point, the hand model production is basically completed.
本文的精彩内容来自青岛手板详细内容请点击我们的官方网站:http://www.jrjmockup.com谢谢您的到来!
The wonderful content of this article comes from the detailed content of Qingdao hand board, please click on our official website: http://www.jrjmockup.com thank you for coming!
上一篇：第一页
相关资讯
手板模型加工制作有什么特点？
2023-02-07手板模型加工流程中的油漆质量怎么辨别？
2023-02-04与熔模精密铸造相关的快速成型技术应用
2023-02-02机箱外壳的加工效果和安装注意事项
2023-01-31机箱外壳安装的时候有哪些要求
2023-01-28浅谈手板表面处理中喷砂的选用
2023-01-28浅谈手板加工制造前准备工作
2023-01-28手板工艺之塑料喷涂工艺流程包含5个方面
2023-01-21做铝合金手板加工需要注意什么？
2023-01-21加工医疗器械外壳时，这些因素要留意！
2023-01-21
