大家好，我是小编。3 d打印hand-board模型功能验证的用户或设计验证总是满足哈希,很难避免不小心刮他的作品,同时,在运输的过程中,也难免会散列,不小心烂,失去了打印,不愿意放弃,这就是3 d打印hand-board模型修复。下面是一个实用的介绍。
Hello, I'm Xiaobian. The user or design verification of 3D print hand board model function verification always satisfies the hash, so it's hard to avoid scraping his works carelessly. At the same time, in the process of transportation, it's hard to avoid hashing, carelessly rotting, losing printing and unwilling to give up. This is 3D print hand board model repair. Here is a practical introduction.
1. Use 502 glue for bonding. (502 glue should not be excessive, which will affect the bonding effect. Pay attention to the safe use of 502 glue). In addition to 502 glue, several other different kinds of glue can be used.
2. There will still be some small gaps after pasting
3. There are still some missing parts, which are gaps.
4. First polish the gap and try to deal with the traces.
5. 使用3d打印笔，使用ABS 3d打印材料进行修复(ABS比PLA打磨的更好)，其他材料可以进行修复。
5. Use 3D printing pen, use ABS 3D printing material for repair (ABS is better than PLA grinding), and other materials can be repaired.
6. 使用3D打印笔来填补空白。这是PLA 3D打印材料。其他材料，如SLA光敏树脂，不能使用3D打印笔。
6. Use a 3D pen to fill in the blanks. This is PLA 3D printing material. Other materials, such as SLA photosensitive resin, cannot use 3D printing pen.
7. Poland. Sandpaper can be used for polishing. The thickness of sandpaper can be selected according to the specific requirements of the model.
Repeat 3 times to fill and polish gaps and gaps to ensure smooth connection of gaps and surfaces
8. It's almost repaired, because it's for testing, so the effect of random repair is general, and the trace that can be repaired carefully is not big.
9. After the above steps, the repair of 3D printed handboard model is completed. In fact, it is not difficult. It can be well repaired with more hands.